A short list of some helpful Isilon isi commands for use in storage administration.
| Source Based Routing enable/disable |
|
| Stop SmartConnect from distributing IPs of a specific node (useful for maintenance) (As of 8.x, can be done in the UI from the specific pool) | isi network modify pools sc-suspend-nodes <groupnet_name>.<subnet_name>.<pool_name> <node #s> |
| Start SmartConnect distributing IPs of a specific node after being suspended (As of 8.x, can be done in the UI) | isi network modify pools sc-resume-nodes <groupnet_name>.<subnet_name>.<pool_name> <node #s> |
| Create static route | isi networks modify pool --add-static-routes=192.168.71.0/24-192.168.70.1 --name=media-low:pool0 |
| Remove static route | isi networks modify pool --remove-static-routes=<network>/<CIDR bits>-<ip of gateway> --name=<subnetname>:pool<#> |
| Display current network pools | isi network pools list [-v | -groupname groupnet0 —subnet <subnet name>] |
| Display clients connected via SMB or FTP | isi_for_array -n # 'netstat -an | grep ".445 \|.21 "' |
| Display current connections with smb protocols | date; isi statistics client list --nodes=all --protocols=smb1,smb2 --sort=ops|head -n 30 |
| Rebalance Dynamic Connections | isi network --sc-rebalance-all |
| List connected clients | isi statistics client list --output Node,Proto,Class,UserID,UserName,LocalAddr,RemoteAddr,RemoteName |
| List connected clients on a specific node | isi statistics client list --nodes <#> --output Node,Proto,Class,UserID,UserName,LocalAddr,RemoteAddr,RemoteName |
| Find connected client based on IP | isi statistics client list --remote-addresses "<ipaddress>" |